xcomcan.addresses module¶
Warning
This file MUST NOT be edited.
Please read the complete documentation available on : Studer Innotec SA -> Support -> Download Center -> Software and Updates -> Communication protocols Xcom-CAN
!!! DO NOT CHANGE CONFIGURATIONS BELOW !!!
-
xcomcan.addresses.
BSP_DEVICE_ID
= 601¶ - Read User Info
- Read Parameter
- Write Parameter
- Message as source address
Type: A single BSP (Unicast), used in
-
xcomcan.addresses.
BSP_GROUP_DEVICE_ID
= 600¶ - Read User Info
- Read Parameter
- Write Parameter
Type: Virtual address to access the BSP (Multicast, but only one BSP per installation), used in
-
xcomcan.addresses.
PARAMETER_PART_FLASH
= 0¶ To read a parameter from flash or write a parameter into flash and ram
-
xcomcan.addresses.
PARAMETER_PART_FLASH_MAX
= 2¶ To read the maximal parameter value from flash
-
xcomcan.addresses.
PARAMETER_PART_FLASH_MIN
= 1¶ To read the minimum parameter value from flash
-
xcomcan.addresses.
PARAMETER_PART_RAM
= 4¶ To read a parameter from flash or write a parameter into ram only
-
xcomcan.addresses.
RCC_1_DEVICE_ID
= 501¶ First RCC device (RCC, Xcom-232i, Xcom-CAN), up to 5 allowed, ordered by the index displayed on the RCC (Unicast), used in:
- Message as source address
-
xcomcan.addresses.
RCC_GROUP_DEVICE_ID
= 500¶ type: Virtual address to access all RCC (Multicast), used in
-
xcomcan.addresses.
VS_1_DEVICE_ID
= 701¶ First VarioString device address, up to 15 VarioString allowed, ordered by the index displayed on the RCC (Unicast), used in:
- Read User Info
- Read Parameter
- Write Parameter
- Message as source address
-
xcomcan.addresses.
VS_GROUP_DEVICE_ID
= 700¶ - Read User Info
- Read Parameter
- Write Parameter
Type: Virtual address to access all VarioString (Multicast), used in
-
xcomcan.addresses.
VT_1_DEVICE_ID
= 301¶ First VarioTrack device address, up to 15 VarioTrack allowed, ordered by the index displayed on the RCC (Unicast), used in:
- Read User Info
- Read Parameter
- Write Parameter
- Message as source address
-
xcomcan.addresses.
VT_GROUP_DEVICE_ID
= 300¶ - Read User Info
- Read Parameter
- Write Parameter
Type: Virtual address to access all VarioTrack (Multicast), used in
-
xcomcan.addresses.
XT_1_DEVICE_ID
= 101¶ - Read User Info
- Read Parameter
- Write Parameter
- Message as source address
Type: First Xtender device address, up to 9 XT allowed, ordered by the index displayed on the RCC (Unicast), used in
-
xcomcan.addresses.
XT_GROUP_DEVICE_ID
= 100¶ - Read User Info
- Read Parameter
- Write Parameter
Type: Virtual address to access all XTH, XTM and XTS (Multicast), used in